Wavlink N300 Extender Setup: A Step- By- Step Guide

The Wavlink N300 extender is an advanced wifi device that repeats the WiFi signals of existing routers. This means if you live in a multi-story house, the router can’t provide signals at every corner of the house. You must use the Wavlink extender to use the high-speed internet at every corner. Here in this blog, you will explore how to complete the Wavlink N300 extender setup process at home.

Step By Step Guide to Setup Wavlink

Now we will discuss two main methods for performing the Wavlink wifi extender setup.

• Wireless Method (WPS Button)
• Wired Method (By Computer)

Wireless Method

To set up the Wavlink extender wirelessly, you will need to use the WPS button to connect the extender to your router. Follow the steps outlined below:

• First temporarily settle the extender close to the router.
• Then give power to the extender by plugging it directly into a power socket.
• After that push the WPS button of the router first.
• And after a few seconds press the WPS button of the extender.
• When the extender shows a blinking light the pairing process starts.
• Here you need to wait till the light turns into solid light
• Then move the extender to a low network area or zone.

Sometimes routers do not support the WPS button, then use the cable connection to connect the extender to router.

Wired Method (By Computer)

In this method, you will need to use the Ethernet cable to perform the Wavlink N300 extender setup process. Steps are:

• Settle down the extender to the place where you face a slow and weak network. 
• Take an Ethernet cable to make a connection between the router and the extender. 
• Then give power to both router and extender.
• After that, you need to configure the extender with the router via using a computer.

Configuration

• To configure, attach the computer to the extender by using an ethernet cable or default network.
• Then open any web browser and insert wifi.wavlink.com or 192.168.10.1 into address bar.
• It redirects you to the login page.
• Use the default login credential to perform the login process.
• When you enter the dashboard of the web interface.
• Then select the network name of the router and enter their password.
• This way you can configure the extender to router and complete the Wavlink N300 extender setup at home.You can also setup the extender by using ap.setup interface.

Conclusion

After reading the above blog, you understand, how easy to complete the Wavlink N300 setup process. Because above we provide easy-to-use steps that you follow easily.