Wavlink AX1800 Setup: Full Informational Guide

The Wavlink brand provides all networking devices like routers, boosters, and extenders to the internet users. Here you will get to know famous Wavlink extender model that provide expanded signal in big houses it is Wavlink AX1800 setup.

Wavlink AX1800 Setup

The connection of the Wavlink AX1800 extender is so easy and simple, you can connect it via WPS button as well as the Ethernet cable. Just have a close look at the connection;

• The first task would be attaching the antennas to the extender device and plug it in to the wall socket to power it on.
• By powering it on, you will see extender LED to change colors which means it is ready to setup.
• Now, press the extender WPS button given on the side of the hardware, then within 2 minutes press the router WPS button.
• When the device LED stay stable, it means the extender is connected to the router and now you can manage its settings.

To manage the device settings after the setup or to setup he device using the manual method then use these below written instructions;

Wavlink AX1800 Login

There are two methods that you can reach to the Wavlink AX1800 extender interface. One is through the web-based portal, and another is via app in your phone.

Web-Based Portal

• Plug the extender in to the wall socket and then connect your computer to the extender network.
• Then open the web browser and type in the URL ap.setup or IP address 192.168.10.1, after that press the Enter button.



• You will get to the login page where you have to enter username and password. You can use the ‘admin’ as the username and password (both fields).
• By clicking on the LOGIN button, you will reach to the interface GUI, where you can manage the settings and complete the Wavlink AX1800 setup.

Wavlink App

Yes, you can easily setup the device from the app in your phone. Install the Wavlink app from your phone application store like Play Store (Android) or App Store (iPhone). Just follow steps further:

• Open the app in your phone and then tap on the Terms and Conditions to get to the dashboard.
• The app will need the admin username and password to go further, just type the details.
• Admin details are ‘admin’ as the username and ‘admin’ as the password.
• Enter and click on the Login button, you will reach the interface where you can manage the settings and complete the Wavlink setup .

Issues That You Can Face

• Wavlink extender not working
• Extender can’t connect to router
• WPS method is not working
• Extender interface not responding
• Wrong extender IP address
• Extender not getting internet signals

Down here, you will get to know about some tips and solutions to fix the mentioned issues above;

Troubleshooting Tips

Reboot WiFi Extender

By restarting the extender device, all settings and hardware will refreshes. There are two ways to restart the device.

• Plug out and plug in the extender in to the wall socket once.
• Press the power button on the WiFi extender for twice.

Update Extender Firmware

The firmware update will fix bugs, reboot and refresh the device system and add new features in the extender. To update, connect your computer and access the Wavlink AX1800 setup portal. Check for latest firmware and download the file. Then paste it on the same page to ‘Install’ it.