Wavlink AC600 Setup: Full Informational Guide

The installation of an extender is pretty simple in home. Wavlink AC600 setup is one of the booster plus extender with a unique design. Let’s set it up.

Wavlink AC600 Setup

The first thing before starting the setup you should power on the device. Use a working power outlet and plug it in the socket. Then start the Wavlink setup, which you can do with the help of several methods, given below;

WPS Setup

• The WPS (WiFi Protected Setup) use to connect the networking devices without cables.
• Home router should have WPS button on the hardware and you just have to turn it on.
• Press the WPS button on the router and Wavlink AC600 extender. This action will connect the devices.
• Then, wait for the indication of extender. Ringing solid green light means the connection is successful.
• The extender will set its settings as default, but you can easily change the settings from interface or app.

Web-GUI Setup

• In the Web-based setup, you need an updated web browser in your computer and connection with the extender network.
• It is mostly use method to complete the Wavlink AC600 setup. Open the web browser in your computer.
• You have to type in the IP address 192.168.10.1 in the URL bar and search by pressing the ENTER button.
• You will get to the login page of the interface. Here, you have to enter the username and password (Given in the user manual).
• By clicking LOGIN button you will get the access to the interface, where you can adjust the settings and complete the setup.

Wavlink App Setup

• There is one more way to finish the setup by manage the settings. It is via your phone using the Wavlink app.
• Download the Wavlink app from the phone Play Store or App store and the open it straight away.
• To access the extender device, you have to use the admin username and password (given in the user manual).
• Fill up the fields and you will reach to the app dashboard, where you can easily set the extender up.

Now, have a look at a couple of settings like update and reboot the network along with reset the extender.

How to Update AC600 Extender?

The simpler way to update the firmware of the AC600 extender is through the web-based interface portal. Access the portal through the computer, fill in the username and password on the login page and get into dashboard. Here, you can easily update the firmware version.

How to Reset and Reboot Extender?

Reboot

Restarting the extender helps network, settings and hardware to refresh, so that all bugs will clear out. You just need to turn the extender off and on once. Plug out and plug it in to restart the device.

Reset

The reset process will delete all data, adjusted settings, and ready to setup again after reset. The simple way to do that is pressing and holding the RESET button on the back of the device.

You can also learn how to complete the Wavlink AC1200 setup.

End Words

From this blog, you have learned how to connect and complete the Wavlink AC600 setup in home via different methods.