Wavlink AC750 Setup: Full Informational Guide
January 16, 2025 / Bruce

Wavlink AC750 Setup: Full Informational Guide

The Wavlink is a well-known brand to all; it distributes extender and router all over the world. One of the extender it produce is AC750 WiFi speed extenders. Here, you will get to learn about the Wavlink Setup (Wavlink AC750 setup) in your home.

Wavlink AC750 Setup

The extender connects with the router via WPS method mostly. But you can use the Ethernet (LAN) cable to establish the link.

If user wants to use WPS:

  • Plug the extender into the power outlet and turn it on.
  • Press the router WPS button and within 2 minutes press WPS on extender.
  • The devices will connect automatically with each other.
  • Now, you don’t need to adjust any settings because extender set as its default settings.

    • If user wants to use cable:

    • Use a damage free Ethernet cable. Plug it in to the router LAN port.
    • Plug the other end to the Extender Ethernet port, and then turn the devices on.
    • After that connection, you should adjust the settings from the below given steps and methods.

      • Login/Configuration

    • The most used method for the Wavlink AC750 setup is through the GUI interface. You can access it through the IP address 192.168.10.1 or URL ap.setup or WiFi.wavlink.com. Just connect a computer to the extender network and search the URL or IP in the browser. Reach to the login page, enter the admin credentials, and access to interface. Here, manage the settings.
    • The other method is through the Wavlink app which you can download from the platform like Play Store, or App Store. Open and access the app with the username and password (admin). Within the dashboard, you can adjust all settings and networks.

      • How to Change WiFi Password?

      To change the password of the network, you have to the access the interface or open the app. Use the admin username and password to get to the dashboard. Now, choose the Settings > Advanced > Wireless Networks > SSID > enter the username and password. Then you should SAVE the changes to apply the credentials.

      How to Reboot WiFi Extender?

      The reboot process usually used to refresh the settings of the extender or any other network devices. You need to turn off and turn the extender on for once to restart. There are two ways to do that:

    • Unplug the device from the outlet and plug it again.
    • Press the power button on the device for twice.

      • How to Reset AC750 Extender?

      The reset process should be the last option to solve any situation that user face (technical issues). It will clear all settings adjusted ones and deletes all data. Have a look how to do it:

    • Find the RESET button on the extender.
    • Press and hold it for 10 seconds.
    • Release it and the reset process will start.
    • It will end after minutes.

      • The Conclusion

      From this article post, you have learned about how to complete the Wavlink AC750 setup in home within minutes.

Tags: